LonWorks to Modbus RTU Serial Gateway
LonWorks to Modbus RTU Serial Gateway
Overview:
The Anybus Communicator LonWorks Gateway
(ABC-LON-RTUslave) is a unique product that can bridge the communication
gap with LonWorks networks and conventional Modbus RTU based systems
& devices. The product can, via the PC-based configuration utility
program ABC LWTool link data between devices located on a LonWorks
Network and devices on a Modbus network. The LonWorks side of the
product is fully compliant with the Lonworks network variables (SNVT's)
and can be set up to produce or consume almost any network variable. The
Modbus side of the product supports the classic Modbus registers for
Input and Output data.
The Communicator Gateway supports RS232/422/485 on the serial side and Free Topology Network on the LonWorks side.
The Communicator is a SLAVE on the Modbus RTU side. This means that you
connect this to a Modbus network which has a Master connected. The
configuration of the module is simple and you can do it yourself with a
configuration tool in Windows environment.
The delivery comes complete with a DSUB connector with screw terminals
for the serial sub-network and a short Installation Leaflet for the
electrical installation.
The configuration program ABC LWTool has to be ordered separately. A free demo is available for download.
Key Features:
- Support for Modbus RTU Slave;
- Up to 256 input + 256 output LonWorks Network Variables / Modbus Word Registers;
- RS232/422/485 selection possible;
- Special LW Config Tool available for Network Setup (Free Demo available);
- CE, UL & cUL marked;
- Amount and type of network variables configurable, data linking between LonWorks variables (SNVT's) and ModBus Registers;
- Support for self installation;
- FTT-10 Echelon Smart Transceiver for better immunity from magnetic and high-frequency common mode noise;
- DIN-rail mountable - PE via DIN-rail
Features:
Interfaces |
Serial interface: |
RS232/422/485 |
Baud Rate: |
78 kbit/s (FT-X1 Free Topology) |
I/O Input: |
256 Word Registers |
I/O Output: |
256 Word Registers |
LonWorks Tranceiver: |
FTT-10 Echelon Smart Tranceiver |
Sub Baud Rate: |
1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57,6 kbit/s |
Protocols: |
LonWorks, Modbus RTU |
Galvanic isolation: |
Standard for both bus side and serial side |
|
|
Software |
Config Method: |
ABC LWtool Modbus for Windows |
|
|
|
Mechanical |
Dimensions: |
120 mm x 75 mm x 27 mm |
Casing: |
plastic, IP20 |
|
|
Environmental |
Operating temperature: |
0 ÷ 55 °C |
|
|
Files:
Ask about Anybus Communicator LonWorks Gateway: