Overview:
JetNet 5628G is an IEC61850-3 Modular Managed Ethernet Switch, equipped with 4 on-board Gigabit RJ45 / MINI GBIC combo ports plus 3 modular slots for maximum 24 10/100 Base-TX Ports or 18 100Base-FX Fiber interfaces ports. The JNM5 series
modules are flexible for different port volume, media types and application needs
JetNet 5628G, a special design for substation
automation and industrial control room, is compliant
with the IEC61850-3, IEEE1613 high level
environmental certifications. JetNet 5628G has the
capability of forwarding Data, GOOSE, SCADA
message without any loss or collision. Different power
input types and connectors, including 85-264VAC,
88-370VHDC and 18-48VLDC power inputs, are
flexible for field power constructions.
The advantage of choosing JetNet 5628G is that the
switch supports on board 4 gigabit ports which allow
users to trunk up to 8G uplink bandwidth or to form
2 independent Gigabit rings. The 24 100M interface
allows to form 12 100M rings for a reliable network
redundancy. This is the world’s only multiple ring
redundancy design.
The switch also supports Jumbo Frame forwarding
up to 9.2Kbytes. Furthermore, the transmission of
large files in industrial environments becomes more
efficient and solid.
To fulfill the advanced management, control and
security requirements in power substations and
control rooms, JetNet 5628G supports various
software features. The VLAN, QoS, IGMP, layer 2/4
Access Control List, 802.1x, SNMP V3, LLDP, etc.
complete the demand and greatly satisfy technicians’
requests
IEC61850-3 / IEEE1613 Compatibility
In the substation environment, there are many
EMI & Environmental Phenomena, such as the
electric,magnetic, high energy power surge,
uncontrolled temperature & humidity...etc. When it
comes to the Ethernet for substation automation, the
utility companies generally advise you to comply to
the IEC61850-3 standard and IEC1613 standard.
IEC61850-3 is standardized for the design of substation automation.
It defines the standard for the "Communication Networks and Systems
in Substations". IEC61850-3 defines the "General Requirements" for
relevant
equipments. The IEC1613 defines the “Standard
Environmental and Testing Requirements for
Communications Networking Devices in Electric
Power Substations”.
High Bandwidth and Performance
JetNet 5628G series support 24 fast Ethernet ports
plus 4 gigabit combo ports as well as wire speed
forwarding and up to 9,216 bytes jumbo frame. The
24+4G combo port design provides benefits and
advantages when planning your industrial network
architecture.
- Acting as the access switch, 100M speed is still
the major and popular in industrial environment.
- Acting as the distribution switch, 4 Gigabit Combo
ports are designed for network redundancy,
connecting public server or uplink path....
- 2 Gigabit ports are for forming independent
ring, or connecting multiple switches with RSTP
protection..
- 2 ports for ring and the others for connecting to
public servers with higher bandwidth.
- The upper connection can be aggregated with up
to 8G bandwidth in full duplex mode by LACP.
- 4 Combo Ports Design to save stock of storing
different kinds of transceivers.
|
|
Multiple Super Ring Technology
The JetNet 5628G supports new generation ring
technology – MSR which includes various new
technologies for redundancy applications and
structures of different networks.
Maximum12+2G rings aggregation capability
|
Korenix JetNet 5628G supports MultiRing which
allows aggregating multiple Rapid Super Rings. With
the MultiRing technology all the Fast Ethernet and Gigabit Ethernet ports can be part of the ring ports.
Besides, up to 12 100M Rings can be formed and 2
Gigabit Rings can be aggregated to single access
switch.
Traditional ring switches, which only allow one ring setting
or one ring traffic passthrough, need additional links or settings to
connect multiple rings. When there are several ring requests in your
network, the setting and environment becomes complex. Unlike these
traditional ring switches, with MultiRing feature the lower rings can
connect to the 5628G directly.
|
Link Layer Discover Protocol
The Link Layer Discover Protocol (LLDP) was
formally ratified as IEEE 802.1AB-2005. LLDP is
the Layer 2 protocol that allows the network device/
station to advertise connectivity & management
information, the identity & major capabilities, receives
and establishes network management information on
the local same network. In industrial environments, most vendors
provide their own discovering protocols, window utility or other tools
to manage their switches. The LLDP protocol
fixes the interoperability among them. With LLDP
supported, users can easily browse the network
devices and establish the network management information schema about
the stations.
|
Supporting SNMP, LLDP and JetView protocol, the
JetNet 5628G series can be easily discovered, port
and ring status can be displayed by JetView Pro,
Korenix designed Network Management System
or other NMS which support SNMP and LLDP. The
software can help administrators efficiently and
effectively manage the surveillance network.
|
Advanced Security by Layer 2/4 Access Control List
In substation automation or
industrial control room installation, multiple types of advanced
security features are required and must be implemented. The secured
Access Control List (ACL) makes it easy to limit certain devices
communicating with the other addressed devices and by the specific
protocol. Example rules include:
(1) the administrator
to multiple stations,
(2) stations to stations
(3)
stations to public servers…etc.
|
|
Features:
- 3 exchangeable modular slots for adding up to 24 10/100-TX or 18 100Base-FX
- 4 On-Board Gigabit RJ45/SFP combo ports
- Exceeds IEC 61850-3, IEEE1613 Power Substation Standards
- Non-Blocking backplane, 16K MAC table for wire speed bidirectional switching
- Korenix MSR pattern aggregates up to 12 x 100M Rings plus 2 Gigabit Rings
- 802.1s Multiple Spanning Tree Protocol, RSTP for complex network
- 256 Tag based VLANs segregate IEC 61850 GOOSE message streams from each other
- Advanced Private VLAN and Q-in-Q Features
- 8 QoS priority for prioritizing the control and management packet from SCADA
- IGMP Snooping, GMRP, Rate Control for multicast message management
- Supports SNMP, LLDP and JetViewPro i2NMS software for auto
topology visualization and efficient group management
- Secure system by 802.1x, IP/MAC Access Control List, SSH/ HTTPS
- DHCP Option 82, DHCP Server for IP address assignment
- IEEE 1588 Precision Time Protocol for precise time synchronization
- 85-264VAC, 88-370VDC, 24/48VDC power input
Ordering information:
- JetNet 5628G IEC61850-3 24+4G Modular Managed Ethernet Switch
Power Input: 1 x 85-264VAC/88-370VDC + 2 x 24/48VDC
- JetNet 5628G-2AC IEC61850-3 24+4G Modular Managed Ethernet Switch with Dual AC input
Power Input: 2 x 85-264VAC/88-370VDC, Standard 3 pronged AC plug
- JetNet 5628G-2HDC IEC61850-3 24+4G Modular Managed Ethernet Switch with Dual 88-370VDC input
Power Input: 2 x 85-264VAC/88-370VDC, 3 pin Terminal Block
Accessories:
JetNet 5628G Series (4G Combo on board, No Fast Ethernet
modules, no SFP transceivers,) Rack Mount Kit, Quick Installation Guide,
Document CD, Console Cable, Power code
Additional Modules:
JNM5-8TX: 8 ports 10/100Base-TX module
JNM5–2SFP/4MSC: 2 100Base-FX SFP + 4 100Base-FX/SC Multi-mode 2KM
JNM5–2SFP/4SSC: 2 100Base-FX SFP + 4 100Base-FX/SC Single-mode 30KM
JNM5-4TX/4SFP: 4 ports 10/100TX + 4 100FX-SFP Socket
Optional Accessories
- 100Base-FX Multi-Mode SFP Transceiver
- 100Base-FX Single-Mode SFP Transceiver
- 100Base-FX BIDI/WDM Single-Mode SFP Transceiver
- Gigabit Multi-Mode SFP Transceiver
- Gigabit Single-Mode SFP Transceiver
- Gigabit BIDI/WDM Single-Mode SFP Transceiver
Files:
Ask about JetNet 5628G: