Overview:
Korenix JetNet 6810G series, the revolutionary Gigabit Managed
Industrial Power over Ethernet Switches with patented 24V to 48V Power
booster technology, are specifically designed for making the deployment
of standard PoE IP cameras feasible on buses, railcars, ships,
harbors, etc. With the smart thermal detection function, the JetNet
6810G isolated power booster becomes an intelligent and reliable power
control device for PoE vehicle applications in harsh environments with
high temperature variations. The eight 10/100 TX PoE injector ports can
deliver up to 120W power per unit and 15.4W per port by IEEE 802.3af
standard to fulfill local increasing PoE demands. The two Gigabit
Ethernet ports provide high speed uplink to connect with higher level
backbone switches with Korenix MSR
TM network redundancy technology. Korenix RSR
TM
can recover the network failure in less than 5 ms. To work under
vibration and shock environments, the industrial D-code M12 connectors
(JetNet 6810G-M12) or rugged RJ connectors (JetNet 6810G-RJ) provide
exceptional solid Ethernet and PoE connections.
Driving the IP Surveillance Market
Since the ratification of the Power over Ethernet
standard in 2003, the Power over Ethernet technology becomes a trend;
more devices adopt PD technology to obtain power through Ethernet cable
eliminating the need of running separate power wirings to a remote
device. The JetNet 6810G series is equipped with the new PSE solution,
compliant with IEEE 802.3af standard and forced powering mode. It
supports 8 PoE ports in End-span wiring architecture with up to 15.4w
powering ability per port and 120W per unit, to drive the IP cameras for
cross–street monitoring or WiMAX systems for internet access at train
stations, airports or Hot-spots.
|
|
Power Budget Limitation with Priority Control
The JetNet 6810G series provides budget and priority
control to ensure that the total power consumption will
not exceed the power limit installed by user. It also
provides budget control function to limit the output power in case if
the PD device is not claimed right consumption numbers. This feature
allows user to protect high priority
PD devices from shut down caused by overloading of the power supply.
Isolated 24~57V DC PoE Booster for vehicle deployment
The isolated system design allows JetNet 6810G series efficiently
powering outdoor PD equipments, such as Wireless AP, WiMax systems,
Outdoor IP cameras and other PoE-enabled devices. With the booster
technology it provides fast, easy and cost-effective solution for
configuring PoE networks on transportation and automation applications.
|
JetNet 6810G series is designed with the Korenix
patented DC 24V to 48V boost technology for vehicle PoE applications
where DC 48V power supply is not available. The DC booster supports
High-pot isolation feature to protect the device from the lighting and
surge of the Ethernet cable and meets IEEE mandate safety requirement
of Power over Ethernet and UL safety requirement of TNV-1 circuit. |
Smart Thermal & Power Booster Protection
As states the rule of ”The Principle of Conservation of Energy”, the
energy remains constant and cannot disappear in any isolated system,
but can be converted to another form. This rule is the same in
electrical circuit, where it can generate heat and become higher when
the loading is more and therefore, can cause a system shut-down.
To avoid this situation, JetNet 6810G series
adopts thermal detector to check the temperature of DC booster and
adjust the available PoE output to ensure the DC booster is working
under safety temperature. This behavior refers to the output curve of
power booster; Once the temperature exceeds the limit, system will turn
off the PSE port. This feature makes JetNet6810G PoE switch an
intelligent power control device that helps you to maintain the PD
devices under specific temperatures.
|
|
Solid RJ45/M12 Connectors against Vibration and Shock
In most occasions, PD devices installed in industrial environments
are being subjected to vibration, shock, dust and other environmental
threats. Korenix has designed JetNet 6810G series with RJ and M12
connectors resistant to vibration and shock in order to best fulfill
the requirements of various applications. Equipped with 8 M12 D-coded
connectors, JetNet 6810G-M12 series can be used for upgrading industrial
applications while delivering power along with data to PD devices in
industrial machinery, factory automation, railways, marine applications
etc. For outdoor networking applications, such as telecom, outdoor
surveillance, wireless AP connections, JetNet 6810G-RJ PoE switches
with 8 rugged RJ45 Ethernet connectors can be ideal solutions.
Comprehensive Redundant Solutions – Multiple Super Ring (MSRTM)
The JetNet 6810G supports new generation ring technology - MSRTM
(Multiple Super Ring), which includes various new technologies for
different network redundancy applications and structures. The JetNet
6810G allows aggregating up to 5 Rapid Super Rings, including 4 Fast
Ethernet plus 1 Gigabit Ethernet Rings. With the MSRTM
technology, a node can be configured to multiple rings with the failover
time in as little as 5ms and zero-second of restoration time. In
addition, users can extend the ring topology by adding hundreds of
JetNet series to meet the large-scale network needs without compromising
the network speed. The MSRTM also allows the JetNet series
to easily connect with core management switches via standard Rapid
Spanning Tree Protocol or through multiple paths or nodes to increase
the reliability by RDHTM (Rapid Dual Homing )(RDHTM) technology. By integrating MSRTM
and Link Aggregation Control Protocol (LACP) the JetNet series can
enhance the link availability and increase the overall link capacity.
Two or more Fast Ethernet connections are combined in order to increase
the bandwidth and to create a resilient and redundant link.
Rapid Super ring (RSRTM) Technology
Rapid Super Ring is the 2nd generation
of Korenix Ring Redundancy technology. The recovery time is greatly
improved from 30ms to few ms for both copper and fiber ring. The Ring
master can be auto-selected by RSR engine. The 1st ring port of the R.M. is the primary path while the 2nd ring port of the R.M. is the block path. Once the primary path fails, the 2nd path will be recovered within few ms. Besides, the restoration time is also shortened to zero in the R.M. auto-selection mode.
|
|
Seamless Ring Port RestorationTM
Seamless restoration is a new Korenix patented technology which can
restore a failed ring without causing any loop problem, topology change
and packet loss. With a 0 second restoration time, this mechanism
eliminates any unstable status and guarantees the applications running
non-stop.
Rapid Dual Homing (RDHTM) Technology
Rapid Dual Homing is also an important feature of Korenix new generation
Ring technology. It supports ring coupling with other vendors devices.
Moreover, providing easy configuration and multiple redundancies, the
failover time is much faster and the restoration time is zero ms.
Uplinks can be auto detected and gathered into groups. In each group
uplinks are sorted into primary, secondary and standbys based on their
link speed. The uplink with the highest speed is more likely to be
active path for data transmission. Link aggregation is also integrated
into RDHTM. An uplink connection can be a single link or
several links aggregated as a trunk, which provides better redundancy
and link capacity.
TrunkRingTM
TrunkRing is a new feature in MSR
which merges the two technologies of RSR and link aggregation. It takes
advantages of aggregation to enhance the link redundancy, while
increasing the link speed. The ring will open only if all the aggregated
links are broken. Link aggregation can be achieved by either static
trunk or LACP. Not all the link sections in a TrunkRing need to be the
same. Ring links can be either symmetric or asymmetric. Some are a
single path, and the others are aggregated by links where the number of
links in a trunk group can be different. Users can enhance the link
redundancy at different locations in accordance to the need. The link
with less speed is more likely to be used as the backup path for
restoring the network to full play capacity.
|
c |
Link Aggregation Control Protocol
Link Aggregation Control Protocol allows users
grouping multiple Ethernet ports in parallel to increase the link
bandwidth. The aggregated ports can be viewed as one physical port, so
that the bandwidth is higher than just one single Ethernet port. The
member ports of the same trunk group can balance the loading and backup
with each other. The LACP feature is usually used when higher bandwidth
is needed for the backbone network. This is a cost-effective way for
transfering much more data.
|
|
Auto Topology Discovery & Efficient Management through LLDP and JetView Pro i2NMS
JetNet 6810G supports topology discovery or LLDP (IEEE 802.1AB Link
Layer Discovery Protocol) function that can help users to discover
multi-vendor’s network devices on the same segment by an NMS system,
which support LLDP function. With LLDP function, NMS can easily
maintain the topology map, display port ID, port description, system
description, VLAN ID, etc.
Once a link failure happens, the topology changed events are updated
to the NMS to help users easily maintain the network system. Besides the
SNMP and LLDP protocols, JetNet 6810G series efficiently works with the
Korenix patented JetView Pro i2NMS, which in addition to the autotopology discovery, also delivers MSRTM
group management, group IP assignment, firmware upgrade, configuration
file backup/ restore ,SNMP MIB Browser /compile, etc. Furthermore, users
can export the topology map to diverse formats, such as JPG, BMP, PNG
and PDF, for easily managing and trouble-shooting the network. The
user-friendly software allows administrators to discover devices
automatically and efficiently manage the performance of the industrial
network.
|
|
Outstanding Management and Enhanced Security
The JetNet 6810G series provides various network control and security
features to ensure the reliable and secure network connection. To
optimize the industrial network environment, JetNet 6810G series
supports advanced network features, such as VLAN, IGMP Snooping,
Quality of Service (QoS), Link Aggregation Control Protocol (LACP),
Rate Control, etc. To avoid hacker’s attacks and ensure the secure data
transmission, JetNet 6810G series features DHCP client, DHCP server
with IP and MAC binding, 802.1X Access Control, SSH for Telnet
security, IP Access table, port security and many other security
features.
Features:
- 8 10/100 Base TX PoE and 2 Gigabit uplink ports
- Solid M12 D-coded (JetNet 6810G-M12) or Rugged RJ45
Ethernet connectors ( JetNet 6810G-RJ) to protect from vibration
applications such as PoE in Tram, Rail, or Highway
- 8 PoE ports support IEEE 802.3af standard with 120W total power budget / max. 15.4W per port
- Built-in Isolated 24V to 57V DC PoE Booster for vehicle use 32G switch Fabric, 8K MAC address
- All ports support Korenix patented RSR with 5ms recovery time, and MSR for up to 4 x 100M Rings plus 1 Gigabit Ring
- IEEE 802.1AB LLDP and optional JetView Pro i2NMS software for auto-topology and group management
- Tag VLAN for multiple VLAN traffic isolation
- LACP port trunk for bandwidth aggregation in video surveillance
- Auto Power Budget Control with Thermal Detection
- Redundant DC Power Inputs and Relay Output
- AC 1.5KV Hi-Pot Isolation Protection for ports and power
- EN50155 compliance (applying)
- -40~60°C wide operating temperature
Ordering information:
JetNet 6810G-M12 Industrial 8 PoE + 2G Managed M12 Booster PoE Switch
Includes:
- JetNet 6810G-M12
- M-12 D-code to RJ-45 Ethernet Cable x1
- M-12 A-code 5-pin to DB-9 console cable x1
- M12 D-code 4-pole Field Assemble able Connecter x 8
- M12 A-code 8-pole Field Assemble able Connector x2
- Field Assemble able power connector x1
- Cap of M12 connector (tighten on the switch) x 11
- Wall /Panel Mounting kits with screw x 1 set
- Quick Installation Guide x1
- CD user manual x 1
JetNet 6810G-RJ Industrial 8 PoE + 2G Managed RJ45 Booster PoE Switch
Includes:
- JetNet 6810G-RJ
- M-12 A-code 5-pin to DB-9 console cable x1
- Cap of M12 connector (tighten on the switch) x1
- Rugged RJ45 Field Assemble able Connecter x10
- Cap of rugged RJ-45 connector (tighten on the switch ) x 10
- Field Assemble able power connector x1
- Wall /Panel Mounting kits with screw x 1 set
- Quick Installation Guide x1
- CD user manual x 1
Files:
Ask about JetNet 6810G-M12: