Overview:
The JetNet 5010G is a Managed Industrial Ethernet Switch, equipped
with 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45/100-FX/Gigabit SX/LX
combo ports. The 2 gigabit ports are used to form the non-stop Rapid
Super Ring. The 3rd gigabit port is used to connect the upper switch,
couple ring or public server. The gigabit combo port design giving
flexibility to choose copper or fiber media, 100Base-FX or 1000Base-X,
multi-mode or Single mode for different distance and without stocking
different switch models.
The JetNet 5010G is designed as rugged surface in aluminum material,
curvilineal heating dispersing mechanical design and with wide
operating temperature. The embedded software supports full Layer 2
management features, multi-form ring redundancy, network control,
monitor, security and notification. The JetNet 5010G also provides
builtin watchdog timer, digital input and relay output to avoid
undetected damage. With JetNet 5010G, you can fulfill the dream of
having the perfect solution to construct your industrial Ethernet
infrastructure.
3rd Gigabit Uplink for Flexible Network Planning
JetNet 5010G offers astonishing three Gigabit RJ-45/SFP combos which
improves the performance dramatically compares to typical two Gigabit
RJ-45/SFP combos. Each combo comes with a flexible connection, 100Mbps
Single Mode/Multiple mode or 1000Mbps Single mode/Multiple mode, as well
as fiber connection or copper connection. All together, end-users can
achieve as many as 10 different combinations of ports connection. Also,
by selecting a suitable range of fiber transceivers, JetNet5010G can
fulfill your industrial applications with any transmit distance.
100 / 1000Mbps SFP Supported
The JetNet 5010G SFP socket supports 100Base-FX Single/Multi mode
and 1000Base-SX/LX/LHX/XD Multi/Single mode transceiver. The available
distance of the 100Base-FX is up to 30KM. 1000Base-SX multi-mode
supports 550M, 1000Base-LX Single-mode supports 10KM, 1000Base-LHX
single-mode supports 30KM, 1000Base-XD single-mode supports up to 50KM.
1000Base-ZX single-mode supports up to 70KM.
Multi-form Rapid Super Ring
It is critical for
industrial applications that network remains non-stop and co-exist with
other network. The JetNet 5010G supports Ethernet redundant ring
technology- Rapid Super Ring, Korenix 2nd generation Ring redundancy
technology. The Ring Master can be auto-selected by the RSR engine. The
recovery time of the gigabit fiber ring is enhanced as high as 5ms.
The advanced Dual Homing II technology also facilitates the JetNet
5010G to connect with the core managed switch or copper 2 or multiple
Rapid Super Ring. Rapid Super Ring can backward compatible with Super
Ring of JetNet 4000/4500 series.
100 / 1000Mbps SFP Supported
Dual Homing II is the advanced feature of Korenix 2nd generation
Ring redundancy technology. When you would like to connect multiple RSR
or form the redundant topology with other vendors Dual Homing II is the
advanced feature of Korenix 2nd generation Ring redundancy technology.
When you would like to connect multiple RSR or form the redundant
topology with other vendors
Various Network Control and Security Features
The JetNet 5010G provides various network control and security
features. The Network Control feature allows users to optimize their
industrial environment. The supported features include VLAN, IGMP
Snooping, Quality of Service(QoS), Link Aggregation Control Protocol
(LACP), Rate Control. The security can help users to avoid hackers'
attack. The features include DHCP Server, IP and MAC Binding, 802.1x
Access Control, SSH, IP Access Table and Port Security.
Link Aggregation Control Protocol
Link Aggregation Control Protocol allows you to group multiple
Ethernet ports in parallel to increase the link bandwidth. The
aggregated ports can be viewed as one physical port, so the bandwidth is
higher than just one single Ethernet port. The member ports of the same
trunk group can balance the loading and backup with each other. The
LACP feature is usually used when you need the wider bandwidth for the
backbone network. This is an inexpensive way for you to transfer much
more data.
Port Security
Port Security is the enhanced security feature provided by JetNet
5010G. Port Security is also known as Port and MAC binding. The users
can bind specific MAC address to the specific port, add the MAC and Port
binding entry/entries to the port Port Security is the enhanced
security feature provided by JetNet 5010G. Port Security is also known
as Port and MAC binding. The users can bind specific MAC address to the
specific port, add the MAC and Port binding entry/entries to the port
Easy-to-Configure Network Management Features
The JetNet 5010G also provides users many advanced management
features. It can be configured smartly by JetView, Web browser, SNMP,
Telnet and RS-232 console Command Line Interface (CLI). Failure
notification by E-mail, SNMP Trap, System Log, Digital Input and Fault
Relay. The JetNet 5010G also supports built-in Watchdog timer to recover
system when detected CPU failure.
JetView, Easy Management Utility
The JetView is the convenient tool to help administrators to discover the JetNet 5010G/5008GP/4706 series Switches.
It support group IP assignment,group firmware upgrade, group configuration backup and restore.
A Built-in Watchdog Timer
With a built-in Watchdog timer, the JetNet 5010G performs a warm
boot (restarting the switch) automatically when switch's system locks
up. It saves the effort of maintenance for keeping network alive if the
switch can recover by itself.
Features:
- 7 10/100-TX ports and 3 Gigabit RJ-45/SFP combo ports (10/100/1000 Base-TX, 100 Base-FX, 1000 Base-X)
- Multi-Form Rapid Super Ring (recovery time <5ms), Dual Homing II, Multiple Ring and RSTP
- VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
- 7.4Gbps Non-Blocking, 8K MAC address table
- Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH and JetView
- Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, 802.1x network access control
- Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output
- Rigid Aluminum Case Complies with IP31, Curvilineal heat dispersing,
Redundant power, DIN-Rail/Wall-Mounting/Desktop Installation
Ordering information:
JetNet 5010G Industrial 10-Port Managed Ethernet Switch
Includes:
* JetNet 5010G(without SFP transceiver)
* Wall mounting plate
* Quick Installation Guide
* Documentation CD-ROM
* Console Cable
Optional Accessories
* 100Base-FX Multi-Mode SFP Transceiver
* 100Base-FX Single-Mode SFP Transceiver
* 100Base-FX BIDI/WDM Single-Mode SFP Transceiver
* Gigabit Multi-Mode SFP Transceiver
* Gigabit Single-Mode SFP Transceiver
* Gigabit BIDI/WDM Single-Mode SFP Transceiver
Files:
Ask about JetNet 5010G: